Features: JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply

VDDQ = 1.5V (1.425V ~ 1.575V)

800MHz fCK for 1600Mb/sec/pin

8 independent internal banks

Programmable CAS latency: 11, 10, 9, 8, 7, 6

Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

8-bit pre-fetch

Burst Length: 8 (interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write (either on the fly using A12 or MRS)

Bi-directional Differential Data Strobe

Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)

On Die Termination using ODT pin

Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°Cº

Asynchronous Reset

PCB: Height 0.74" (18.75mm) or 1.18" (30.00mm)

KINGSTON 8GB 1600MHZ DDR3 CL11 DIMM (206937)